coding spirit - fmlist_scanner

1. Introduction to FMList Scanner

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:48:36+00:00

fmlist_scanner index Online Translation(s): https://codingspirit-de.translate.goog/dokuwiki/doku.php?id=fmlist_scanner:start&_x_tr_sl=en&_x_tr_tl=de 1. Introduction to FMList Scanner Introduction FMList Scanner, hereinafter referred to as scanner, was motivated by Günter Lorenz. The scanner should collect broadcast transmitter information for the FMLIST (, Station database of the UKW / TV working group). The project was presented first on September 8, 2018 at the …

7. Operation

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:51:01+00:00

fmlist_scanner index 7. Operation Operation through SSH connect via SSH - adjust the port number and possibly also the user scanner ssh -p 9001 scanner@hayguen.hopto.org in case you are already connected to the host - as different user sudo su -l scanner start the scanner (as scan user)

2.2 Setup on a pre-installed Pi or PC

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:57:29+00:00

fmlist_scanner index 2.2 Setup on a pre-installed Pi or PC if you already have a Pi or PC with a Linux-OS in one of following flavours, you can use that installation for the FMList-scanner * Debian * Ubuntu * Raspbian * Raspberry Pi OS in any case, it is recommended to setup a new user - to allow a clean uninstall. we suggest the user

6. Problems and possible solutions

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:50:51+00:00

fmlist_scanner index 6. Problems and possible solutions * Nothing happens: * Check power supply. Test with another (USB) cable * Remove the SD card and insert it again * at start, it beeps a few times (long long long), the red LED flashes and everything repeats again

2.1.2 Setup Operating System onto the Orange Pi 3 LTS

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:55:40+00:00

fmlist_scanner index 2.1.2 Setup Operating System onto the Orange Pi 3 LTS Foreword The Orange Pi 3 LTS hardware looks to be an interesting and available Single Board Computer (SBC). See http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/orange-pi-3-LTS.html for the hardware details. [ i ordered from https://de.aliexpress.com/store/group/OPI-3-LTS-8GB-EMMC/1553371_30000000040035.html with a plastic case for 50 EUR - including delivery in April 2022 ]

2.1.3 Setup Operating System onto the Orange Pi Zero 2

Anonymous (anonymous@undisclosed.example.com) — 2022-06-23T02:51:29+00:00

fmlist_scanner index 2.1.3 Setup Operating System onto the Orange Pi Zero 2 Foreword The Orange Pi Zero 2 hardware looks to be an interesting and available Single Board Computer (SBC). See http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2.html for the hardware details. [ i ordered from https://de.aliexpress.com/item/1005002002861625.html with a plastic case for approx 40 EUR - including delivery in May 2022 ]

2.1.1 Setup Operating System onto the Raspberry Pi

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:55:07+00:00

fmlist_scanner index 2.1.1 Setup Operating System onto the Raspberry Pi Download the image I would recommend a 64-bit system, as Raspberry Pi 3B, 3B+ and 4B are 64 bit hardware. Raspberry Pi Foundation provides a suitable system at . I would recommend “Raspberry Pi

3. Installation & setup of scanner software

Anonymous (anonymous@undisclosed.example.com) — 2022-07-27T20:23:37+00:00

fmlist_scanner index 3. Installation & setup of scanner software Installation of the software after login with the dedicated scanner user sudo apt install -y git cd $HOME git clone https://github.com/hayguen/fmlist_scan.git cd fmlist_scan cp setup.sh my_setup.sh

4. Setup wiring: ATX-buttons, LEDs and Piezo-buzzer on Raspberry

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:50:29+00:00

fmlist_scanner index 4. Setup wiring: ATX-buttons, LEDs and Piezo-buzzer on Raspberry Following notes are only for the Raspberry Pi 3B/3B+/4B NOT for other models! GPIO pins The Raspberry Pi has two pin headers that are physically labeled (column Physical in following table). WiringPi software does number the pins differently (

2. Setup

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:52:55+00:00

fmlist_scanner index 2. Setup Register at FMLIST Registration is checked manually; you may want to register at - asking for access to URDS - before starting the setup and hope it's finished until the “Pi” is ready. In case FMLIST shows up in a foreign language, try to change in the upper right corner of the site.

5. Software hints for operation

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:50:40+00:00

fmlist_scanner index 5. Software hints for operation Windows For controlling the scanner from a Windows-PC, software for SSH and SCP is required. A Linux PC usually comes with such software. Corresponding software may have to be installed for Windows: * SSH for remote console:

Anonymous (anonymous@undisclosed.example.com) — 2022-05-06T22:14:27+00:00

fmlist_scanner index

2.3 System configuration after Setup of Operating System

Anonymous (anonymous@undisclosed.example.com) — 2022-06-17T22:50:03+00:00

fmlist_scanner index 2.3 System configuration after Setup of Operating System System Update Update your system: sudo bash apt update && apt upgrade && reboot now System configuration Unique hostname set up a unique hostname - especially, if you have multiple Pi's. for simplicity, i would suggest